The Recycling Of Electronic Waste In India Environmental Sciences Essay

The Recycling Of Electronic Waste In India Environmental Sciences Essay E-waste is growing rapidly and becoming the major issue of all over the world. E-waste components contain different types of toxic and hazardous substances those are harmful for environment and human health so it is necessary to handle and manage the E-waste in a proper and better way. In India the management of E-waste have a great significance due to the generation of large amount of E-waste in opposite to lack of appropriate infrastructure and proper procedure for recycling and disposal of the E-waste. This paper endows with current situation of E-waste in India, trends of disposal and recycling of India, status of E-waste management of India and at the last the required action steps for better handling of E-waste and its management. Key words: E-waste, hazardous substances, Recycling, Disposal and E-waste management. Introduction: In todays globalisation world, the consumer market for electrical and electronic products is expanding continuously on high rate. On the other hand due to increasing demand and development of new technology, the life span of the products is dropping that result in large amount of electronic scrap. As mentioned by UNEP in 2005: Every year 20 to 50 million tonnes of electrical and electronic equipment waste (E-waste) are generated world-wide, which could bring serious risks to human health and environment, while 4 million PCs are discarded per year in China alone. (K. Brigden et al., 2005) This large amount of E-waste also contains toxic and hazardous elements in different electrical and electronic components those create serious problem regarding their handling, recycling and disposal. What is E-waste? Electronic waste (E-waste)or Waste Electrical and Electronic Elements (WEEE) is the term generally used to describe disposed electronic and electrical products which are old and end of life household appliances including laptops, TVs, DVD players, mobiles, i-pods. However sources of E-waste can be classified into three main categories (Pinto, 2008): Large Household Appliances IT and Telecom Consumer Equipment The pie chart in figure 1below indicates the percentage of electrical and electronic waste generated by different household appliances, IT and consumer products. Figure 1: Sources of E-waste (Source: India E-waste guide) Environmental and Health hazards of WEEE (Waste Electrical and Electronic Equipment): As per knowledge E-waste contains more than 1000 different substances and chemicals which are hazardous and non hazardous (Pinto, 2008). From that some hazardous substances are toxic and can create some serious problem for the environment and human health. E-waste contains many toxics like heavy metals including lead, cadmium, mercury, Polychlorinated Biphenyls (PCBs), plastics, Brominated flamed Retardant, barium, beryllium, phosphors and additives etc. The impacts of these toxics and hazardous substances on environment and human health are described in table 1 below: Table 1: Hazardous Substances and their Impact on Environment and Human Health Toxic Used components Impact on health and environment Lead Glass panel and gasket in computer monitors Solder in Printed Circuit Board Causes damage to the central and peripheral nervous systems, blood systems, kidney. Effects impede brain development among children. Lead tends to accumulate in the environment and has high acute and chronic effects on plants, animals and microorganisms. Cadmium Infrared detectors and semiconductor chips Some old cathode ray tube Accumulate in the human body and it damages the kidneys. Mercury Thermostats, relays, switches, mobiles, lamps and medical equipments. Damage to brain and kidneys. It affects the food chain by accumulating in the living organism particularly via fish. Hexavalent chromium Galvanised steel plates It can cause damage to DNA. Plastics Electronic equipment and computer housing When it burns it release Dioxin which can damage to human health. BFRs Circuit board and plastic housing of equipment Cause neurobehavioral alterations and it affects the immune system of body in animals. Beryllium Mother board and finger clips It can cause lung cancer and skin deceases. Phosphor and additives Applied as a coat in inside of the CRTs. It can damage those human who dismantle CRTs by hand. Situation of E-waste in India: Telecommunication and information technology are the fastest growing industries today not only in India but world over. Based on the growth of electronics and IT equipment in India; Manufacturers Association of Information Technology (MAITD) has collected the following statistics. (http://www.scribd.com/doc/19009739/E-waste-India, Accessed on May 10th 2010) During 2007-08, PC sales were over 7.3 million units growing by 16% and there is an installed base of over 25 million units. The consumer electronics market is growing by 13-15% annually and has an installed base of over 25 million units. The cellular subscriber base up by 96% during 2007-08 and its installed base are estimated to cross 300 million marks by 2010. E-waste generated in India during 2007 was around 332,979 MT besides about 50,000 MT entering the country through imports as per a GTZ-MAIT (Gesellschaft Technische Zusammenarbeit Manufacturers Association for Information Technology) sponsored study by IMRB (Indian Market Research Bureau). Unprecedented growth of the IT industry during the last decade and early product obsolescence due to continuous innovation resulted in the generation of this large quantity of E-waste. Out of this quantity only 144,143 MT was available for recycling and refurbishing and only 19,000 MT of E-waste was processed. WEE Generating Top Ten Cities City WEE (Tonnes) Mumbai 11017.1 Delhi 9730.3 Bangalore 4648.4 Chennai 4132.2 Kolkata 4025.3 Ahmadabad 3287.5 Hyderabad 2833.5 Pune 2584.2 Surat 1836.5 Nagpur 1768.9 WEE Generating Top Ten States State WEE (Tonnes) Maharashtra 20270.59 Tamil Nadu 13486.24 Andhra Pradesh 12780.33 Uttarpradesh 10381.11 West Bengal 10059.36 Delhi 9729.15 Karnataka 9118.74 Gujarat 8994.33 Madhya Pradesh 7800.62 Punjab 6958.46 DW Table 23: The generated E-waste in Major states and Major cities (source: ENVIS, 2008) E-waste Handling Process in India: E- Waste is mostly generated in Metropolitan cities in India, where a complex E-waste handling infrastructure on a long tradition of waste recycling has been developed. So far, the E-waste recycling is purely market driven, operated by a very entrepreneurial informal sector. A large number of new business es focusing on reuse or extraction of secondary raw materials resulted due to easy adaption of rag pickers and waste dealers to the new waste stream. (http://india.ewasteguide.info/ , Accessed on April 27th 2010) Figure 2: E-waste Handling Process in India (Source: Indian E-waste guide) The E-waste from corporate consumers and households enters a city specific familiar E-waste recycling system. The collection and allocation of E-waste is done by middlemen, scrap dealers and rag pickers, also known as  «kabadiwalas ». The informal recycling system includes acceptable processes such as dismantling and sorting but also very harmful processes such as burning and discharging in order to extract metals from electronic equipment. Harmful techniques like burning wires are common practice in the informal recycling sectors in big cities in India. Trends in Disposal and Recycling: E-waste has become more desirable due to soaring price of gold, silver and copper. E-waste round-ups are used as fund raisers in some communities. E-waste processing industry in Europe was marked by the ban imposed on disposal of electronic waste in landfills. European Union advanced E-waste policy by implementing the waste Electrical and Electronic Equipment Directive in 2002, making manufacturers responsible for the disposal of E-waste at the end-of-life. (http://www.scribd.com/doc/20784043/Managing-E-waste-Indian-Perspective, Accessed on May 2nd 2010) Large amount of used electronics have been sent to countries like China, India, and Kenya, where lower working conditions and environmental standards make E-waste processing more profitable due to lack-luster enforcement of legislation regarding exports of E-waste. In Switzerland after implementation of first electronic waste recycling system in 1991, since 2005 it has been possible to return all the E-waste at collection points and sale points free of charge. The total amount of recycled E-waste exceeds 10 kg per capita per year and two established Producer Responsibility Organizations (PRO) are responsible for handling electronic waste and electrical appliances. A policy known as Extended Producer Responsibility (EPR) was implemented by European Union, designed to make equipment manufacturers financially or physically responsible for their equipment at the end-of-life cycle. This policy internalized the end-of-life costs and provided a competitive incentive for companies to design equipment with less costs and liabilities. (http://www.scribd.com/doc/20784043/Managing-E-waste-Indian-Perspective, Accessed on May 2nd 2010) Some states in the US developed policies banning CRTs from landfills recently due to the fear of heavy metals being leached into the ground water. Diversion from landfill has been driver for legislation in many states requiring collecting and processing of E-waste separately from the solid waste stream. Increased regulation of E-waste and concerns over the environmental harm has lead to disposal costs. The toxic trade by brokers or recyclers with an incentive to export the E-waste to developing countries was first exposed by the Basel Action Network (BAN) in their report in 2002. United States has not ratified the Basel Ban Amendment and no domestic laws forbidding the export of E-waste. From 2004, State of California and Canada has begun to impose an Electronic waste recycling fee on the purchase of new television, computers and computer components, making recycling mandatory for all those products. The European Union, South Korea, Japan and Taiwan have already demanded that manufac turers and sellers be responsible for recycling 75 per cent of electronics item. Computer scrap is managed through various alternatives such as product reuse, conventional disposal in landfills, incineration and recycling in India. Since the methods of disposal are very rudimentary and pose grave environmental and health hazards, it has become a very serious problem. Processing the waste by uncontrolled burning and disposal are causing environmental problems. The biggest source is through imports of E-waste in India. (ENVIS, 2006) Recycling Steps in India: Manual Dismantling: The accrued electronic and electric waste in India is dismantled and sorted manually to fractions cathode ray tubes, printed wiring boards, metals, plastics, cables for component recovery and invaluable materials like wood, plastics and other invaluable metals for mechanical shredding. Refining and conditioning processes are used for treating valuable fractions. Refining and Conditioning: In a variety of refining and conditioning processes like separation, open burning, acid baths, different E-waste fractions are processed to useful components and to secondary raw materials. Final Disposal: Solid waste is deposited in a municipal landfill where significant emissions to air and water are caused as systematic gas and water collecting systems are not installed. Site is crowded with informal waste pickers and valuable materials for recycling collected by people. Figure 3: Different stages of Recycle steps in India (source: K. Brigden et al., 2005) E-waste Management in India: The major concern all over the world today is environment preservation and its protection. The Basel convention on the control of Tran boundary Movement of Hazardous wastes and Disposal was signed by India on 15th March, 1990, ratified in 1992 and amended in 2003. India cannot export the Hazardous wastes listed in Annex VIII of the convention from the countries who ratified the ban agreement and is free to import E-wastes from countries not ratified the Basel Convention. The classification of E-waste as hazardous is unclear in Indian legislation. In India there is wide range of environment legislation but still there are no any specific rules or laws for E-waste (Joseph, 2007). As per the Hazardous Waste Rules implemented, in 1989 particular E-waste is not treated as hazardous unless it is not proved that they contain higher concentration of toxic substance. The electronic waste included under List-A and List-B of Schedule-3 of the Hazardous Wastes (Management Handling) Rules, 1989 are amended in 2000 2003 and now it requires specific permission from the Ministry of Environment and Forests. At this time informal sector collect the all electronic waste around the country and recycle them, Government has taken the following steps to improve the awareness about recycling of E-waste and to establish a sound E-waste management with healthy environment. (Joseph, 2007): à ¢Ã¢â€š ¬Ã‚ ¢ Central Pollution Control Board (CPCB) collaborated with Toxics Link and organised several workshops on E-waste management. à ¢Ã¢â€š ¬Ã‚ ¢ CPCB has started to take quick action for rapid assessment of the E-waste generated in major metropolitan cities of the country. à ¢Ã¢â€š ¬Ã‚ ¢ To formulate effective strategy for better E-waste management CPCB has made up a national working group. à ¢Ã¢â€š ¬Ã‚ ¢ The Department of Information Technology (DIT), Ministry of Communication and Information Technology has published full comprehensive technical guide book titled Environmental Management for Information Technology Industry in India and circulated this guide book all around the country. à ¢Ã¢â€š ¬Ã‚ ¢ The DIT at the Indian Telephone Industries has set up demonstration projects showing how to recover copper from the Printed Circuit Boards. Challenges involved in E-waste management in India: Despite of such awareness and willingness for implementing improvements is increasing rapidly; there are still few challenges or major obstacles in the way of managing the E-wastes safely and effectively. These Challenges are Policy makers are very keen to make a better strategy for an effective E-waste management but they have to face the challenge of lacking of reliable data. There is no any efficient take back scheme for consumers so that only 10 % E-waste can reach to recyclers. The formal sector of the country does not pose a safe E-waste recycling infrastructure so they have to depend on informal sector that create severe risks to the environment and human health. The existing e waste recycling systems are purely business-driven that have come about without any government intervention. Any development in these e waste sectors will have to be built on the existing set-up as the waste collection and pre-processing can be handled efficiently by the informal sector, at the same time offer numerous job opportunities. Recommendations for Reducing E-waste: The new paradigm of sustainability demanding products to be cleaner, long-lived, upgradable and recyclable should be adopted instead of cheaper and faster products. To achieve these goals for sustainable production, environmental justice, corporate and government accountability, few recommendations for action needs to be taken. (http://www.scribd.com/doc/23359394/E-waste-System-failure-imminent, Accessed on May 14th 2010) Ban Hazardous Waste Imports: Complying with the rules and regulations forwarded by the Basel Convention that import of all the hazardous waste containing any hazardous elements should be banned dumped from developed countries to developing countries. There is no reason that developing countries of the world should bear the environmental risk without benefiting from this sort of E-waste. Make the Producer Responsible: The principle of Extended Producer Responsibility (EPR) makes manufacturer responsible for the products throughout the end-of-life cycle. This will make producer to focus more on designing products with recyclable materials, at the same time less hazardous. Incentive provided by the legislation for product take back policy to the original equipment manufacturer will eventually boost this principle, reducing E-waste all over the globe. Inform the Consumer: Electronic and Electrical manufacturers must specify the hazardous elements contained in their products thus creating awareness among the masses about environmental and health risks posed through these hazardous elements. Proper waste management protocols should also be prescribed to the consumer. Design for Recycling: Mechanisms for recovering raw materials while decommissioning an electronic device must be clean, safe and efficient to environment and human health. During recycling and dismantling process, warning must be placed for possible hazards in the work place and products must be made to recyclable form with rapid and easy reduction. Conclusion: Overall the situation of E-waste can be controlled by achieving zero land fill and Zero land fill is only available if we implement the cycle of four R. This four R are: Reduce try to reduce the E-wastes Reuse reuse the E-waste product Recycle recycle the available E-waste for reuse Recover Recover the valuable products after recycling Figure 4: Cycle of Four R A Case Study on Recycling of E-waste: Name of Company: Infotrek Syscom Ltd. Initiative of Socio environmental concern: To build an environmentally safe recycling pattern Building a forum of Creators of Electronics, corporate houses and Original Equipment manufacturers (OEMs) to help for the cause. Create partnership program. Key Features of Infotrek Syscom Ltd (www.docstoc.com/docs/33807398/E-waste-Management-_-Recycling, Accessed on May 14th 2010) An ISO 9001:2000 Certified, probably first of its kind and 100% export oriented unit for carrying recycling activities. Well Structured facilities spread over 7000 Sq.ft of building and further plans to acquire 45,000 sq.ft of land near JNPT. Modern Material handling equipments. Fully equipped laboratory to facilitate R D. Facilities of extending latest knowledge to the qualified experienced engineers. Bar code system for maintaining inventory movements. Registered with green online initiative. E-waste Management and Recycling Equipment Refurbishment and resale De-manufacturing and disassembly Recovery of valuable components Hazardous and base metal recovery Hazardous component management and environment friendly disposal. Outcomes: In a span of just two years of its existence, Eco Recycling Ltd (subsidiary of Infotrek Syscom Ltd), has developed great awareness about the hazards of waste electrical electronic equipments (WEEE) and need for systematic handling. The change is visible, more and more corporate and individuals have started taking interest and approaching to Ecoreco. It may not be out of place to mention that Ecoreco is presently serving to more than 200 corporate entities spread across India. (http://www.scribd.com/doc/18020190/EWaste-PPT, Accessed on May 16th 2010)

Is Walking Better Than Traveling by Car?

carCars revolutionize transportation but walking is still the best. Automobiles use gas that emits carbon dioxide which causes the world to heat up. Big powers come with big responsibilities; there is no surprise that the car has many financial responsibilities. Cars require practically no work to make it move and it resulted in losing health related benefits. Walking is better than driving because it is environmentally friendly, it has financial benefits, and it has far more health advantages. First, driving ruins the environment.For an automobile to function, it requires gas, and when the gas is used up, it becomes carbon dioxide that traps heat near the Earth’s surface. Greenhouses gases are necessary for influencing the amount of the sun’s energy being absorbed into earth and being radiated back into space. However, the overload of the greenhouse gases, which is caused by the increase in gas emissions, can cause the earth surface to heat up. This is called global wa rming which will raise the sea level by 18 to 59 centimeters if all the glaciers melt.This change in ecosystems and destruction in habitats caused by the rising sea level will also result in the extinctions of many species. Since cars release greenhouse gases, walking is therefore a better choice because it won’t exacerbate the tragedy of global warming. Additionally, driving has financial disadvantages compare to walking. Walking requires only a person’s two legs, while driving requires a car. The cheapest car one can purchase at a car dealership is at least ten thousand dollars.Adding to that expensive fee, there are other expenses like car insurance, gas expense, repair expenses, and maintenance expenses. Respectively, they are needed to be financially secured from accidents, to make the car function, to follow the law and to prolong the performance of the car. Hence, walking is better than driving due to its financial-freedom. Lastly, walking is better than driving because it is better for one’s health. Walking is a physical activity that trains the heart.According to a recent Harvard study, walking can reduce heart risks, chances of cancer, type 2 diabetes, anxiety and depression. As a matter of fact, walking at least 30 minutes a day can increase the life expectancy of people suffering from obesity or high blood pressure. On the other hand, driving is dangerous which is proven by the following statistics. In 2005, United States of America had 6, 420, 000 car accidents with 2. 9 million people injured and 42, 636 people killed. Thus, walking is better than driving because it is a hysical activity that promotes living and doesn’t risk common, dangerous accidents. Walking is carbon free which does not contribute to global warming and therefore it is better than driving. Also walking doesn`t cost a single cent unlike driving. Furthermore, walking can prolong a person`s health while driving can shorten it. Clearly from, walking is better than driving because it doesn`t affect the heating environment, it requires practically no money, and it has health benefits.

April Raintree : Storyline Plot Essay

Through out this novel, a lot of tragic and powerful events transpire. They make the reader think quite a bit on what they have just read and after this, you tend to react. These events and occurrences are the main idea behind the story and they continue to constantly grab your attention and you keep you focused on what is going on in the novel. However, too many big impact and negative events take away from the story and it’s traditional role of focusing on one major element through out the book. The reader is ceased of time to actually think about what has just happened, before something else suddenly does. Beatrice Culleton has a liking for an eventful novel and it is definitely noticeable. In the first chapter of this book, we learn that April and her younger sister, Cheryl are taken away their parents, due to a severe alcohol problem. From here in, the negative events start to occur. After April and Cheryl are removed from their family home, they tend to grow independent and look out for each other. Along these lines, they endure many challenges and new experiences. They end up going to endless foster homes during their child hood years. The two of them travel from home to home and are involved in different situations at each. One of the worst environments from both of the girls was at the DeRosier residence. After April begins to form into a mature woman and moves on with her life, she ends up moving to the city of Winnipeg living in the core of downtown. At this point, she begins to see the occasional man every now and then, due to her acquaintances at her law firm office. Just when you thought everything was going good for April, things take a turn for the un-expected. The man who April believed was a wholesome, respectful business associate was nothing more than a cheating coward going behind his wife’s back to see April. Although this is a serious problem, I couldn’t help it laugh when this was mentioned in the novel. The reason being, is how many things can go wrong for April at this point? She’s had a rocky childhood, troubles at work with co-workers, and now this? The second most striking and shocking event that Culleton brought upon the reader was in Chapter 12, when April was raped while in the car. It was not  only bad enough that Cheryl was in the hospital prior to this, due to severe injuries after being beaten, but also now it was April who was in the worse situation. The reader is almost shocked, but at the same time, wondering what is going to happen next. If it was Beatrice Culleton’s intention to place these tragic events in place after each other repeatedly to the keep the reader involved, she did an excellent job. April and Cheryl experienced a string of bad luck and misfortune their whole life, and to read all of this is sometimes unbelievable. That goes to show that the native culture can be treated poorly, and it isn’t right. The final and biggest occurrence in April Raintree is in Chapter 16. Cheryl decided she couldn’t go on with life anymore and committed suicide by jumping off of a bridge. It’s ironic how this happened, seeing as how their mother took her own life by enduring in the same tragic practice. April then moves into a state of mourning with Roger Madison by her side for comfort. Before the reader can make sense of what has just happened, we are told of another detail of Cheryl’s past, her child. Not to mention, finding out about their long lost parents from Cheryl’s many journal entries left underneath her bed in a shoebox after her death. I can give Culleton credit for writing an exciting novel and taking the reader to the final end of the book still trying to get over what they have just read. In conclusion, this story line would have made sense starring more action filled characters and not young native women. Beatrice Culleton throws in negative occurrences way too often, and the story looses its happiness that we once had read while April and Cheryl were only children. The memories of each of the girls writing back and fourth to each other while in the foster homes sounds bliss at this point. It seems so un-real and out of the ordinary that both of the sisters experience all of this during one lifetime. On the positive side however, the author wrote a memorable novel that kept you in tune through out the story. You were provoked to keep on reading more and more, and for some, that rarely is the case while doing a novel study such as this one. One thing that was impressive is how Culleton ended the book off of on a positive note for once. April ends up being the foster mother to her sister’s child, Henry Liberty. With Roger by her side as always, April finally has some happiness in her life.

The Case Study of Kelly - 905 Words

Kelly Dispute What should Kelly do? Should she call CLAIR, or discuss this further with Mr. Higashi? Office conflicts and misunderstandings are common in any culture. Another common factor in any culture is a protocol of command when it comes to such issues. This protocol typically never involves getting higher authorities involved unless absolutely necessary as it permanently damages relationship between parties and can prevent further success for the parties within their company. Kelly is in a tough situation. She needs her holiday time to take a vacation, but her supervisor seems unwilling to give it to her. Mr. Higashi is operating under a misconceived pretense in handling this matter. Specifically, he is questioning Kellys credibility based solely on the coincidence that her other two work colleagues were out sick at the same time. Kelly should begin by first taking a step back, evaluating the culture and determining if there is a respectful way to correct the issue. Her first option should be to request a meeting with Mr. Higashi and go over the doctors note with him. She sho uld then state her case that she desires to take a vacation to Osaka during Golden Week and needs her holiday time for that vacation. She should also respectfully remind Mr. Higashi of his obligation under her contract. If this meeting does not prove successful, then Kelly should mention to Mr. Higashi that she will be forced to contact CLAIR if her contract is not upheld (Salacuse,Show MoreRelatedBMGT 110 Final Paper Kelly S Sandwich Shop Case Study 11731 Words   |  7 Pagesï » ¿Case study The purpose of this paper is to identify how different factors effect on the growth of small businesses. The growth of small businesses has been influenced by factors such as growth strategy, business forms, short and medium term goals, financing assistance, organizational structure and staffing needs, customers and promotion, and ethics and social responsibility. In this paper will to discuss how the different factors alter the advancement of small businesses. Kelly’s sandwich concessionRead MoreWhat effective Recruitment and Selection processes should be developed for Multinational Organisations to achieve their Objectives. A case study of Kelly Services3353 Words   |  14 PagesBACKGROUND STUDY: Globalization and fierce competition is forcing multinational companies (MNCs) to reduce costs, increase efficiency and be competitively advantageous by moving out operations and functions in emerging markets of the developed as well as developing countries. In order for MNCs to succeed, there are a lot of things to be taken into consideration because of these concerns, the areas of Human Resource Management (HRM) and International Human Resource Management (IHRM) are given aRead MoreResearch Papers1085 Words   |  5 PagesCase Studies for Conflict Resolution: A key element in civil rights training Wisconsin  WIC      CONFLICT  RESOLUTION:  CASE  STUDIES   The following case studies match the scenarios in the online training. Review (watch or read) each scenario, and then answer the questions, below. Think about what you have learned and identify a conflict resolution technique that you would use in each situation. Case Study #1 Julia just finished a certification appointment for Maria, a participant who hasRead MoreThe Myers -briggs Type Indicator Predict Academic Major Selection995 Words   |  4 Pagestype Indicator Predict Academic Major Selection? Kelly and Pulver (2008) address this specific question of whether your score on the Myers Brig (MBTI) is a true predictor of major selection. According to them even though the MTBI test was developed was method for career assessment it can not be used for academic major selection on the grounds that there are benefits that are provided that can not be measured. Therefore in this specific article Kelly and Pulver are conveying that the MBTI would notRead MoreEssay1103 Words   |  5 Pageswhether such preferences are as a result of same race The research by Kelly,D.J., Quinn, P.C., Slater, A. M., Lee, K., Ge, L., and Pascalis, O. (2007) and (Bar-categorization, how exposure to different faces early in life could affect their preferences. These preferences als o develop and become present at age 3 months old, they prefer own race faces. (Bar-haim et., al (2006). The other-race effect develops during infancy by Kelly et., al (2007) refers to a better recognition memory for faces of ownsRead MoreCase Study Kellys Assignment in Japan909 Words   |  4 PagesIntercultural Management Case study: Kelly’s Assignment in Japan Read the case: Kelly’s Assignment in Japan (Chapter 9 pages: 363-365) posted on Connect learning platform –study reflectively and identify the characters and the principal issues in this case. Answer the following questions: 1. ------------------------------------------------- Drawing from you understanding on the assigned readings (Deresky), explain the clashes in cultural, customs, and experiences that occurred in this situationRead MoreTort and Regulatory Risk Plan1681 Words   |  7 PagesAlumina Inc. case as an example. A company such as Alumina can manage their risks through three basic measures which are preventative, detective, and corrective. Preventative measures are the easiest for a company to control and change. These can include anything from the company’s internal laws to the education of these laws. Freedom of speech is a civil right given to people and in cases such as Alumina vs. Kelly Bates; preventative measures could have helped controlled the case. Even thoughRead MoreEssay about History of Stem Cells1407 Words   |  6 Pagesplaces. The studies of stem cells have been around for many years. There were many people researching stem cells during the early 1900s, but Leroy Stevens had the greatest impact on the future study of stem cells. The people of ancient civilization were curious about the study of stem cells. Hindus from the thirteen and fourteen centuries BC knew that the result of the fetus would come from mixing two seeds of the parents (Kelly 16). They werent the only people who wondered about the studies of stemRead MoreThe Seven Step Model Of A Decision Making Model930 Words   |  4 PagesI choice to use the Seven Step Model of a Decision-Making Model for Resolving Ethical Issues in order to define what is ethical in this case study. 1. Gather the Facts Joanna is an experienced nurse taking care of Mrs. Kelly, who was Joanna’s patient many times in the past for her primary problem which is COPD. This time Mrs. Kelly was admitted with complaints of abdominal pain what was different from her primary diagnoses. Her vital signs were with normal limits and no significant changes fromRead MoreThe Effects Of Social Cognitive Career Theory On The Empowerment Of Battered Women958 Words   |  4 PagesIn conclusion, in the peer-reviewed social science journal design study, â€Å"Applying Social Cognitive Career Theory to the Empowerment of Battered Women†, Chronister and Hawley McWhirter depict that when women leave an abusive environment without access to the necessary needs such as housing, safety, and financial assistance, women will experience failed attempts to escape as well as negative outcomes. Some examples of negative experiences are, police who downplay and validate the abuser’s behaviors